اخبار القسم en
Master Thesis
The Department of Control and Systems Engineering awarded the Master Degree in computer
engineering specialization to the student (Ather Jaafar Baqir) on 4/10/2018 and the discussion
room in the section about his research entitled (case study of locating mobile robots by Wi-Fi).
1-Dr. Azad Rahim Karim \ president.
2-Dr. Ahmed Abdel - Sahib Hashem \ Member.
3-Dr. Ahmed Mazhar Hassan \ member.
4-Dr. Hamid Musa Hassan \ Member and Supervisor.
Where the researcher in this message to use Wi-Fi to locate the mobile robot through the
calculation of the strength of the Wi-Fi signal received to calculate the distance between
the mobile robot and the point of access in addition to calculating the destination of the robot
accurately in a two-dimensional environment; on this occasion we congratulate the student
(Atheer Jaafar Baqer)
The Department of Control and Systems Engineering holds a workshop on a project for documenting and coding work procedures and models
The Department of Control and Systems Engineering held a workshop on Wednesday 26/9/2018 on the project of documenting
and coding the procedures and models of administrative work in the department in the presence of the directors of the
divisions and the administrative units within the department under the supervision of the assistant head of the department
for administrative affairs (Ahmed Ibrahim Abdel Karim), at the direction of the Ministry of Higher Education and Scientific
Research for the purpose of finding a clear and structured context for all administrative procedures.
On 9/9/2018, the Control and Systems Engineering Department held a meeting of engineers,
technicians and administrators on the occasion of the new study year, a lot of points were discussed like development
of solutions to overcome them to contribute to the advancement of scientific and educational progress in this section.
The meeting was chaired by the head of the department, Dr. Azad Rahim Karim and the assistant head of the department for
administrative affairs, Dr. Ahmed Ibrahim.
Students of Control and Systems Engineering Department are conducting the second attempt exams
On Sunday, 2/9/2018 the second exam attempt of students for undergraduate study for the academic year 2017-2018
under the direct of Dr. (Azad Rahim Karim) Head of the Department and the members of the examination committee to prepare
the the examinations with comfort, we wish our dear students Success.
Course entitled "Principles of the distinction of faults and maintenance of electronic devices"
The Department of Control and Systems Engineering, in cooperation with the Research Unit of Automation and Human Sciences,
organized a skills development course in the interactive learning method entitled "Principles of Distinguishing Disturbances
and Maintenance of Electronic Devices" to the students of our department after completing the final exams and continued for
four days starting from 13/6/2018.
Where a group of students and students section, in addition to the engineers of the Department, which included the session:
1. Measuring and testing instruments and how to use them. 2 - Components of electronic devices and how to examine them. 3. Discrimination of electronic components. 4- Electronic alternatives by use. 5 - Practical exercises in repairing faults. 6. Conduct a questionnaire on the content of the course and how to benefit from it. After the completion of the course, the certificates of participation were distributed and a gift was given to
the participants to enable them to practice the exercises gained during the course and concluded with taking
commemorative photographs.
Electronic Competitive Examination for Postgraduate Students in the Department of Control and Systems Engineering
The graduate students for the academic year 2018-2019 took the electronic competitive exam in the department on
Monday 25/6/2018 where the examination process went smoothly without any technical obstacles. The exam may be inspected by
the assistant president of the university for administrative affairs Dr. (Sami Aboulnoun Al Ajeel)
praised the efforts made by the Committee for the competitive examination to facilitate the examination process
and provide a comfortable atmosphere to perform the test electronically and the results of the results immediately
after the exam.
Master Thesis Discussion
A graduate student in the Department of Control and Systems Engineering (Nora Raad Kadhim)
received a master's degree in Mechatronics Engineering from discussing her tagged thesis
(direct control of the speed of the three-phase induction motor using a foggy control based on its vector path)
on Wednesday, June 13, 2018, at the discussion room in our department, the discussion committee :
1-Dr. Hadeel Nusrat Abdullah \ President.
2-Dr. Ahmed Ibrahim Abdulkarim \ Member.
3-Dr. Qusay Lotfi Hamdi \ Member.
4-Dr. Farezadeq Rafiq Yassin \ member and supervisor.
The main objective of this work is to improve the speed performance of the three-phase inductive motor
in different loads. Therefore, it is proposed to use the direct control technique on the torque,
the use of the integrative proportional control based on the experiment and error method and the proportional
proportional speed controller using controlled control. The integrative proportional control using controlled control
is better than other methods. On this occasion we congratulate the student (Nora Raad) and wish her success.
The Laboratory of Measurements and Components holds a course in the principles of modern standardization science
The staff of the Laboratory of Components and Measurements prepared a course in the basics of modern
standardization science in the laboratory of components and measurements in the Department of Engineering
Control and Systems, for a period of three days starting on Sunday, 10/6/2018. The title of the course
"Essentials of Modern Metrology "where participated in the preparation of the course of:
Eng. Dr. Manaf Sabri Tabo.
Eng. Abbas Abdel Wahab.
The course dealt with the importance of standardization science and its fundamentals in all
modern scientific and industrial achievements, with a detailed explanation of the structure of the
reference reference values of the basic units adopted in the science of standardization and how their values were
originally determined according to astronomical units.
The Department begins its examinations with an inspection visit from the President of the University
The President of the University, Prof. Dr. Amin Douai Thamer, visited the department on the first day of the examinations on Thursday 24/5/2018 where the students inspected the exam halls in the hall with the head of the department Dr. Azad Rahim. To the exams in terms of providing a suitable examination environment in terms of halls and their management by the examination committee and observers, which is reflected on the performance of students for examinations and wish success and excellence for all students to be future projects to serve Iraq.
Visit of the Deputy Minister of Higher Education and Scientific Research to the department and inspect the examination process
The Deputy Minister of Higher Education and Scientific Research,
Dr. Mohammad Attiyah Al-Sarraj, visited with the President of the University, Dr. Amin Douai Thamer,
the students of the Department of Engineering and Control Systems,
who are conducting the exams at the end of the school year.
In addition to the interest of the Presidency of the University,
which conducts several visits to the examination halls throughout the examination period,
and that the Department is keen to provide the environment suitable for students to take the exams in a
comfortable atmosphere without any obstacles, and we wish They are successful in all exams.
More...
The Department of Control and Systems Engineering held a scientific course on the use of the program in the design of various telecommunications and telecommunications systems.
The course was held in a communications lab. it was held by Dr. Ekhlas Khazem Hamza, Lecturer Baedaa Hashim,
Engineer Elham Abdelkarim, (Eng. Ali Abbas) for a period of two days from 9/5/2018.
A detailed explanation of the principles of the telecommunication systems was presented in a theoretical manner and
a practical explanation was given of how to use the students in the implementation of analogue and digital communication systems
The number of participants was about 35 participants Between a teacher and a student. At the end of the course, a certificate of participation was distributed.
The Department of Control and Systems Engineering evaluates its sixth scientific exhibition of robot and manufactured devices
The Department of Control and Systems Engineering held on Monday 7/5/2018 the comprehensive scientific exhibition for the sixth year in a row for the robot and the equipment manufactured by the students and professors of the department and the size and a large number of products in the presence of Prof. Dr. Ameen Douai, and Minister of Youth Affairs and a number of heads of departments and directors of university and the participation of other parties interested in this great activity, which is adopted by the department each year and at the end of the academic year to view what was manufactured from the devices and robots within the department and by his students and teachers.
Master Thesis
Master Thesis Ahmed Ahmed Idris Ahmed, a graduate student in the Department of Control and Systems Engineering, received a Master's degree in Computer Engineering from the discussion of his thesis for the Master of Science (Comparative Analysis of Mechanisms Control of congestion in internet stuff) on Thursday, 3/5/2018. This section has been challenged by the discussion committee from:
1-Dr. Azad Rahim Karim \ president.
2-Dr. Mona Mohammed Jawad \ Member.
3 -Dr. Asmaa Hamid Rashid \ member.
4- Dr. Hamid Musa Hassan \ Member and Supervisor.
Master Thesis
The Department of Control and Systems Engineering awarded the Master's degree (Mechatronics) to the student (Ali Najm Abdulnabi) on April 26, 2018 and the discussion room in the section for its research entitled (Planning of a collision-free point path for a robot leg separated by a Bisier curved technique) The discussion committee was challenged by:
1- Dr. Ahmed Sabah Abdul Amir \ President.
2- DR. Omar Farouk Lutfi \ Member.
3- Dr. expert Abdul Salam Hussein Nafi \ member.
4- DR Abdel-Rahman Ibrahim \ member and supervisor.
